Home / How to / Belkin Router Login – Setup

Belkin Router Login – Setup

5 dakikada okuyabilirsiniz.

Belkin Router Login – Setup

The Belkin router setup: belkin router ip, problems, reset, port forwarding, access, security, manager, login and admin panel you can make as many settings from this page.
Routers are the backbone of the connected home . They briliantly , do their jobs and need to take the lead . Belkin Routers are designed to get you up and running in no time This is the reason why.
Start with simple , just make you want to do online , watch everything easy steps and you’ll be ready to stream surf ..

Belkin Router Setup
Step 1: Plug router into modem. Step 2: Plug router into wall. Step 3: Go to http://router or on your computer or mobile device.
This is the first step to configure the devices on your network . Connect the device according to the order given below.
Modem Port LAN Port is connected to the Internet Device Belkin
The computer connected to the router’s LAN port
Switch Router
When the computer is turned on
The modem is switched off
Access the Belkin router setup Page
In the browser’s address bar of a web-based setup page to access . Belkin WiFi router default IP address is Login
You can set default password and click the Send button only has to simply log in to the setup page.


On the Internet Router configuration Belkin
Click under Internet Connection Type , select the WAN and Internet connection with your ISP.


Maybe you can configure the router ‘s Internet connection are mainly four different ways . Them:
Configuring Dynamic Link Cable Broadband
static Connection
PPPoE Configuration
PPTP Configuration
1. Installation Belkin Router Cable Modem
If you have a cable Internet connection , you need to click and select the next dynamic . In most cases cable Internet service , you may need to type the host name provided by the ISP.
cablemodembelkin-setup In addition to this, to work with cable modem, you may need to clone the MAC address of your computer using the link/button Change WAN MAC Address.
Use the clone button to copy MAC address of your computer. Click Apply Changes after entering the details. After having this step, Belkin will be ready to work with your cable internet connection. This step is important because your Internet Service Provider recognize registered users using the MAC address of the PC used while activating the connection. If you use a different PC, your ISP will not allow it to access Internet because of non registered MAC address. By MAC address cloning feature we can override this restriction.
2. Setup Belkin Router for DSL Modem Using PPPoE
For most of the DSL Internet connections, you must select PPPoE
Enter the Username and password provided by your DSL Internet Service provider.
Here you should enter the user name and password provided by your Internet Service Provider. After entering the details you should click on save settings. Now your Belkin router is configured in PPPoE for DSL broadband connections. If you do not configure in PPPoE(means in bridge mode), you may need to enter username and password (provided by ISP) on your PC when ever you access Internet. Also you will not be able to share the broadband connection in this bridge mode.
Configure Belkin Router With Static IP Address
Select Static and click Next










Enter the Static IP Address provided by your ISP

Click Apply Changes
Setup Wireless Feature On Belkin Router
To edit the wireless settings, click on Wireless tab in the setup page. You can edit the Wireless network name and wireless channel here. Here I have customized certain WiFi settings with personalized information. belkinwirelesssetupttt-login Wireless name (SSID) is the name of your wireless network. The most recommended wireless channel is 6. You can use channel 1 and 11 too. Here I use my name as the SSID by removing the default name. It is important to change the default SSID to easily identify your network. 6. Enable Wireless Security
To enable WiFi security, click on security under wireless tab and follow the instructions in the link below. belkinwirelesssecurityttty-login Change the LAN settings on Belkin Router
You can change the router IP address and you can enable or disable the DHCP function using this window. By default belkin router IP address is but you can change it to any other valid IP address. belkinlansettingsdddd-login There are some other points you must care after configuring the device. One of them is to ensure the safety of the wireless network. It is a nice practice to enable MAC address filtering to avoid any unauthorized access to your WiFi network. To learn how to enable MAC address filter. Cannot Go Online After Installing Belkin Router
Some users says they were able to access Internet before adding Belkin router in their network. After installing the router, they are not able to go online. There are so many reasons for this issue and we have an article about how to deal with such a situation. If you face such an issue on your network. Global Google : –

  • About admin


    Check Also

    How to Update Your Router Firmware

    Router firmware updates are as necessary as updating any gadget’s firmware. A firmware improve gives …

    Leave a Reply